Page 13
800-523-8499
www.dosatronusa.com
Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.
Step 3: Unscrew, remove and set aside.
Step 2: Use the strap wrench to loosen the bell housing.
Step 1: Turn the water off and press the air bleed button a few
times to release the pressure.
D14MZ10 Troubleshooting - Part 3
This D14MZ10 - 14 GPM Troubleshooting Part 3 will cover: The injector is not clicking.
To Next Page
Loading...