Page 2
800-523-8499
www.dosatronusa.com
Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.
Step 6: Press the air bleed button on the bell housing a few times
to release the pressure.
Step 5: After you reinstall the suction hose, you should start to see
the liquid begin moving up the hose. If you don’t see liquid moving
up the hose or you don’t feel suction on your nger, turn the water
off.
D14MZ10 Troubleshooting - Part 1
Step 4: If you feel suction, just cut an inch or so off the top of the
hose and reattach. If the hose is cracked, ridged, or looks really
old just replace it.
To Next Page
Loading...
