Page 8
800-523-8499
www.dosatronusa.com
Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.
Step 3: Grab the barb and pull the check valve assembly straight
out. Set the unit aside.
Step 2: Unscrew and remove the check valve nut.
Step 1: Remove the hose nut or clamp and hose and set aside.
D14MZ10 Troubleshooting - Part 2
This D14MZ10 - 14 GPM Troubleshooting Part 2 will cover: If your injector is pushing
water down into the concentrate tank but is clicking.
To Next Page
Loading...