Page 10
D25RE2 Troubleshooting - Part 3
Step 2: Unscrew to remove and set the lid aside.
Step 3: Grasp the white valve support and pull the piston straight
out of the body.
800-523-8499
www.dosatronusa.com
Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.
Step 1: If the unit isn’t clicking, use a strap wrench
(Part #: TOOL01) to loosen the lid.
This D25RE2 Troubleshooting will cover: The Injector is not clicking.
To Next Page
Loading...