Page 15
D25RE2 Troubleshooting - Part 3
Step 17: Press the white plastic portion of the actuator side to
side. If there is movement, re-tighten the screws.
Step 18: Reinstall the valve support by sliding it onto the inlet
valve.
800-523-8499
www.dosatronusa.com
Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.
Step 16: Now re-install the four screws and hand tighten them in a
star pattern.
To Next Page
Loading...
