dosatron D25RE2 - Suction Testing and Hose Adjustment

Page 2
800-523-8499
www.dosatronusa.com
Proper protection, such as gloves, eye wear, and aprons, are recommended when disassembling a Dosatron.
Step 6: If you don’t see liquid moving up the tube or you don’t feel
suction on your nger, turn the water off. Press the air bleed button
on the lid a couple times to release the pressure.
Step 5: If you feel suction, just cut a half inch off the top of the
hose and reattach. You should see the liquid begin moving up the
suction tube.
Step 4: Check to see if you feel suction on your nger.
D25RE2 Troubleshooting - Part 1