Dostmann Electronic P705 - 7 Data of Probe-Calibration

26
Our quality-probes are the main reason for the preci-
sion and quality of your measuring. To facilitate the
exchange of a probe without a loss of precision, our
probes were measured in our company and added with
a code that describes the characteristic line of the
probe. The code is attached well visible on a label on
the probe.
If you change the probe you have to enter the code into
the measuring instrument. In order to avoid any prob-
lems later on (esp. if the probe is installed somewhere
hard accessible, or if there are several of those exter-
nal probes in use), we recommend to note down the
two values:
Art.No.:
Appellation:
Serial number:
Calibration data:
Art.No.:
Appellation:
Serial number:
Calibration data:
Art.No.:
Appellation:
Serial number:
Calibration data:
Art.No.:
Appellation:
Serial number:
Calibration data:
Art.No.:
Appellation:
Serial number:
Calibration data:
7. Data of probe-calibration