Need help?Do you have a question about the Dot Hill AssuredSAN 3000 Series and is the answer not in the manual?
Provides a step-by-step checklist for installing enclosures.
Guides on connecting controller and drive enclosures.
Details the procedures for powering the system on and off.
Lists requirements for host systems connecting to the storage.
Explains how to connect enclosures to host systems.
Steps for configuring and provisioning the storage system using RAIDar.
Presents basic methodology for locating system faults.
Troubleshooting based on LED indicators and system checks.
Steps to isolate host-side connection faults.
General| Model | AssuredSAN 3000 Series |
|---|---|
| Protocols | SAS, iSCSI, Fibre Channel |
| Hot Swappable Drives | Yes |
| Hot Swappable Power Supplies | Yes |
| Cooling | Redundant, hot-swappable fans |
| Hot Swappable Fans | Yes |
| Type | Storage Enclosure |
| Form Factor | 2U |
| Drive Bays | 12 |
| Supported Drives | SAS, SATA, SSD |
| Maximum Capacity | Up to 192TB (depending on model and drive configuration) |
| Max Capacity | Up to 192TB (depending on model and drive configuration) |
| RAID Levels | 0, 1, 5, 6, 10, 50 |
| Connectivity | SAS, iSCSI, Fibre Channel |
| Host Interfaces | 6Gb/s SAS, 8Gb/s FC |
| Power Supply | Redundant, hot-swappable power supplies |
To Next Page