EasyManua.ls Logo

DOUGLAS MACHINES CORP. LD-36 - User Manual

DOUGLAS MACHINES CORP. LD-36
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Douglas Machines Corp. Page 1 of 16
Operation Manual

Questions and Answers

  • C
    Cole ThomasAug 20, 2025
    What to do if my DOUGLAS MACHINES CORP. Dishwasher is not cleaning?
    • D
      Dylan EvansAug 20, 2025
      If your dishwasher isn't cleaning properly, check the detergent level, wash pressure, and wash temperature. Also, inspect the wash jets for clogs, ensure the water level is correct, and verify that the filters are clean. If your machine has a rotary table, make sure it's turning freely.
  • S
    Steven LeeAug 22, 2025
    Why is my DOUGLAS MACHINES CORP. Dishwasher not rinsing?
    • A
      Aaron RamseyAug 22, 2025
      If your dishwasher isn't rinsing, first check the incoming water pressure. Next, make sure that the door is completely closed. Finally, verify the rinse solenoid valve is working correctly.
  • M
    Michael ChavezAug 25, 2025
    What to do if my DOUGLAS MACHINES CORP. Dishwasher wash pressure is low?
    • E
      edrakeAug 25, 2025
      If the wash pressure is low, ensure the machine is filled to the correct level and that the filters are clear and in place. Check that all wash jets and end caps are properly installed. Look for excessive foam and confirm the pump is rotating in the correct direction. Also, check the pressure gauge.
  • J
    Jacqueline LoweAug 26, 2025
    How to fix Er05 error on DOUGLAS MACHINES CORP. Dishwasher?
    • D
      Denise Mcgrath MDAug 26, 2025
      Error Er05 indicates that the machine has been operated without a sufficient amount of water. To resolve this, ensure the machine is filling correctly and reaching the overflow level.
  • P
    Paul GoldenAug 28, 2025
    What to do if my DOUGLAS MACHINES CORP. Dishwasher rinse temperature is not hot enough?
    • W
      Wendy CrawfordAug 28, 2025
      If the rinse temperature isn't hot enough, check the incoming water temperature (which should be between 120° and 140°F maximum) and the incoming water pressure (no less than 20psi and no more than 30psi of flow). Also, verify that the thermostat is set to the correct temperature (between 180° and 210°F maximum) and ensure the heat source is engaged.
  • C
    Chase WeberAug 30, 2025
    What to do if my DOUGLAS MACHINES CORP. Dishwasher will not turn on?
    • M
      Mr. Joseph HernandezAug 30, 2025
      If the machine will not turn on, check that the incoming power is on and that the machine circuit breakers and/or fuses are in place and turned on.
  • M
    Marco AdamsSep 1, 2025
    What to do if my DOUGLAS MACHINES CORP. Dishwasher will not heat up (electric heated)?
    • K
      Karen JonesSep 1, 2025
      If the dishwasher will not heat up (electric heated), ensure the machine is filled to the correct level and the low water probe is clean. Verify that the circuit breakers and/or fuses marked for the heaters are on, and that the thermostats are set to the desired temperature.
  • S
    Stephen MedinaSep 3, 2025
    What to do if my DOUGLAS MACHINES CORP. Dishwasher will not heat up (gas heated)?
    • S
      Stephanie MarshallSep 3, 2025
      If your gas-heated dishwasher won't heat up, make sure the machine is filled to the correct level and the low water probe is clean. Also, ensure the gas supply is on and the thermostats are set to the desired temperature.
  • R
    Ricardo ElliottSep 5, 2025
    What to do if Er07 error appears on DOUGLAS MACHINES CORP. Dishwasher?
    • N
      Nicole WhiteSep 5, 2025
      If you see error code Er07, reset the pump overload protection device. If the problem continues, contact Douglas Machines Corp. for assistance.
  • K
    Kevin HumphreySep 7, 2025
    What to do if my DOUGLAS MACHINES CORP. Dishwasher wash pump will not start?
    • W
      wagnerwillieSep 7, 2025
      If the wash pump won't start, check that the machine is filled to the correct level and the low water probe is clean. Ensure the door is in the closed position, and verify that the circuit breakers and/or fuses marked for the wash pump motor are on.

Summary

IMPORTANT

Pre-Installation

Guidelines for qualified personnel regarding gas piping, electrical wiring, and gas heated unit installation.

DELIVERY

START UP

Initial Start Up

Step-by-step guide for the initial setup and powering on of the machine.

OPERATION

MAINTENANCE

Daily Maintenance

Procedures for daily cleaning and checks to ensure optimal machine performance.

Periodical Maintenance

Tasks for periodic checks and lubrication of machine components like pump motors and fans.

TROUBLE SHOOTING

Machine will not turn on

Troubleshooting steps for when the machine fails to power on.

Machine will not heat up (gas heated)

Checks for gas-heated machines that are not reaching the desired temperature.

Machine will not heat up (electric heated)

Checks for electric-heated machines that are not reaching the desired temperature.

Wash pump will not start

Steps to diagnose and resolve issues with the wash pump failing to operate.

Wash pressure is low

Troubleshooting steps for when the machine experiences low wash pressure.

Not rinsing

Checks and actions to take when the machine is not performing the rinsing cycle.

Error Codes

Explanation of error codes displayed on the PC board and their corresponding checks.

Rinse temperature not hot enough

Steps to address issues where the rinse cycle temperature is insufficient.

Not cleaning

Troubleshooting steps when the machine is not effectively cleaning items.

PROGRAMMING THE TOUCH PAD PC BOARD

DOUGLAS MACHINES CORP. LD-36 Specifications

General IconGeneral
BrandDOUGLAS MACHINES CORP.
ModelLD-36
CategoryDishwasher
LanguageEnglish