n SuperAdmin: This is for internal use only.
2. Enter the Password.
NOTE: The initial password for a Guest user and Admin User can be found on the
M2054-QS Quick Start instruction that is in the box that came with your console.
These passwords are case-sensitive. Only an Admin user can change passwords.
IMPORTANT: The administrator must change the password as soon as possible to prevent
access by personnel that are not approved. See "Change Password" on page79 for
information.
TIP: As you type your password only neutral "bullet" characters will show (e.g. • • • • • •). Select
the "eye" icon to show the password characters as you type.
3. Push the LOGIN button to log in to the console with the selected user type.
4. If you did not select the applicable language in the Home screen you can push the LANGUAGE button
to go back to the Home screen.
The table that follows shows the types of data that can be seen by the two User types:
Data Type Guest Admin
Inventory X X
Historical Data Table X X
Alarm status X X
Delivery/Leakage X X
Login X X
Logout X X
Association of alarm to relays (per tank) X
Managing internal and external sensors X
Automatic print features X
Managing strapping tables X
Configuring email address book X
Configuration of all dispensers X
TCP/IP address configuration, DNS X
M2051_r4 MagLink LX 4 and LX Plus Configuration Manual | Dover Fueling Solutions 18
To Next Page
Loading...