1. The coefficients A, B must be configured. These coefficients are engraved on the float body and can
also be found on a label that is included the packaging of the AEF. Enter the A & B Coefficients into
the fields.
2. Two alarm thresholds are used:
l t2 Ethanol alarm threshod and t1 Water alarm threshold.
l The system recommends default values for these thresholds however, the user can overwrite
them.
3. Click Save when you complete the configuration.
M2051_r4 MagLink LX 4 and LX Plus Configuration Manual | Dover Fueling Solutions 41
To Next Page
Loading...