3. You can use the tank generator function of the console.
a. Select the tank shape from the drop-down list (Vertical, Flat ended, Cylindrical, Dished-
Ellipsoidal).
b. Enter the tank Height (in mm).
c. Enter the tank Capacity (in litres).
d. Enter the number of Steps for the chart to be divided into.
e. Select the Generate button.
The bottom of the screen shows the volume to height graph and the volume distribution (liters per unit of
height). See the screenshots below:
M2051_r4 MagLink LX 4 and LX Plus Configuration Manual | Dover Fueling Solutions 44
To Next Page
Loading...