Dover ProGauge MagLink LX 4 - Diagnostic Panel Overview

Select the Diagnostic button to open the Diagnostic panel to show information on the quality of the probe
signal (to be assessed by the Progauge factory personnel).
The green check-mark in the left column shows that the signal strength is sufficient.
A yellow check-mark shows a medium signal while a red check-mark would show a low quality probe signal.
The bottom of the screen shows information on the Deliveries, Leak Tests and Autocalibration.
l Delivery: Click on the Delivery drop-down menu to show information on the last delivery recorded.
M2051_r4 MagLink LX 4 and LX Plus Configuration Manual | Dover Fueling Solutions 57