Need help?Do you have a question about the Dovre 2100 Series and is the answer not in the manual?
Pre-installation steps including chimney and ventilation checks, and material requirements.
Chimney requirements: material, height, dimensions, and draught for optimal performance.
Ensuring adequate room ventilation for combustion and heat distribution.
Protecting floor and walls from combustible materials with specific distances and shielding.
Required distances for combustible materials near the fireplace and convection outlets.
Checking for damage, removing loose parts, and preparing the unit for installation.
Attaching the flue collar to the smoke dome using supplied hardware.
Assembling the baffle plate and the 'cold handle' component for operation.
Instructions on how to change the direction of the fireplace door opening.
Correctly positioning, connecting, and mounting the fireplace unit.
Finalizing the installation, including drying times for masonry before use.
Guidelines for the responsible disposal of packaging materials.
Details on suitable fuels (wood, coal, briquettes) and prohibitions to prevent damage.
Steps for safely lighting a fire, ensuring adequate draught and ventilation.
Optimal methods for burning wood, including stacking and air slide adjustments.
How to burn coal effectively using a coal-basket and controlling air supply.
Procedures for ash removal, safe fire extinguishing, and handling emissions.
Recommendations for using the fireplace during specific weather conditions, like fog.
General| Firebox Lining | Vermiculite |
|---|---|
| Log Grate | Yes |
| Flue Outlet | Top |
| Flue Diameter (mm) | 150 mm |
| Flue Size | 150 mm |
To Next Page
