Need help?Do you have a question about the DPS Telecom NetGuardian V16 G2 and is the answer not in the manual?
General| Brand | DPS Telecom |
|---|---|
| Model | NetGuardian V16 G2 |
| Category | Measuring Instruments |
| Language | English |
Describes the unit's purpose, ease of installation, and monitoring capabilities for various site types.
Details the physical dimensions, mounting options, power input, interfaces, and environmental ratings.
Lists standard included items and optional accessories available for purchase.
Details the necessary tools for installation and describes rack-mount and wall-mount procedures.
Explains the fiber option and details the power connection requirements.
Describes LAN, serial port options for M16 G2, and telco connection for V16 G2.
Details the 50-pin Amphenol connector and the optional 66 block connector.
Explains how to connect discrete alarms and configure analog alarm inputs.
Describes the craft port for configuration and D-Wire external sensor connections.
Guides through connecting via craft port (TTY) and LAN for initial setup.
Details configuration for serial ports, modem tuning, and DCP parameters via TTY.
Explains logging on, changing passwords, and using RADIUS authentication.
Guides on setting up email, SNMP traps, voice calls, and TRIP notifications.
Describes global system settings including name, location, contact, and T/Mon settings.
Covers user profile management, access rights, and RADIUS authentication setup.
Details Ethernet and Serial port configuration options.
Explains SNMP settings, including community strings and user access.
Guides on setting up email, SNMP, voice call, and TRIP notifications.
Covers configuration of discrete alarms, analog inputs, and sensors.
Details controls, virtual controls, ping targets, system alarms, timers, and date/time settings.
Shows how to view current alarm status and operate device controls.
Provides status of analog channels, sensors, and the event log.
Displays ping target status, system alarms, and graph generation.
Describes options for backup, reading config, writing changes, initialization, and log management.
Step-by-step guide on how to upload new firmware to the unit.
Explains the status indicated by front and back panel LEDs for various functions.
Provides a map of alarm points and descriptions for system alarms.
Lists DNP3 point indices, their descriptions, and class assignments.
Answers common questions regarding telnet, LAN connection, and SNMP operations.
Details product warranty terms, limitations, and how to contact technical support.
Information on subscribing to the Protocol Alarm Monitoring Ezine and accessing MyDPS.
To Next Page