How to fix Dr.Frei Blood Pressure Monitor when no display appears?
If no display appears on your Dr.Frei Blood Pressure Monitor after pressing the START button, it could be due to exhausted batteries. Try replacing the batteries. Alternatively, the batteries might be incorrectly installed or missing. Please check that the batteries are correctly installed.
Why does the cuff on my Dr.Frei M-400A Blood Pressure Monitor keep inflating?
If your Dr.Frei Blood Pressure Monitor cuff inflates again while measuring, it could be because the cuff is not fastened properly. Make sure to fasten the cuff again. Also, if your blood pressure is higher than the pressure the device has inflated, the device will automatically increase the pressure and start to inflate again. In this case, stay relaxed and wait for the measurement to complete.
Why is my Dr.Frei M-400A result higher or lower than usual?
If your Dr.Frei Blood Pressure Monitor gives a result that is higher or lower than your average measurement, it could be due to incorrect positioning during the measurement. Adjust to the correct position and measure again. Also, remember that blood pressure naturally varies from time to time, so keep this in mind for your next measurement.
Why is heart rate on Dr.Frei M-400A higher or lower than average?
If your heart rate is higher or lower than your average while using the Dr.Frei Blood Pressure Monitor, it could be due to movement during the measurement. Please repeat the measurement, remaining still. It could also be because the measurement was taken just after exercise. Rest for at least 30 minutes beforehand and then repeat the measurement.
What to do if Dr.Frei M-400A Blood Pressure Monitor shows inflation or pressure error?
If you encounter an inflation or pressure error with your Dr.Frei Blood Pressure Monitor, refit the cuff tightly and correctly. If the error persists, contact local customer service for help.
What to do if Dr.Frei M-400A Blood Pressure Monitor shows blood pressure measurement error?
If your Dr.Frei Blood Pressure Monitor shows a blood pressure measurement error, refit the cuff tightly and correctly. Then, relax and repeat the measurement. If the error still remains, contact local customer service for help.
What to do if Dr.Frei M-400A detects movement artifact?
If your Dr.Frei Blood Pressure Monitor detects improper movement during measurement (Artifact), relax and repeat the measurement.
What to do if Dr.Frei M-400A Blood Pressure Monitor shows no pulse detected?
If your Dr.Frei Blood Pressure Monitor does not detect a pulse, refit the cuff tightly and correctly. Relax and repeat the measurement. If the error still remains, contact local customer service for help.
How to troubleshoot problems with Dr.Frei M-400A?
If you are experiencing problems with your Dr.Frei Blood Pressure Monitor, review the instructions and repeat the test. If the monitor still does not work, please contact the local customer service for help.
Explains the concept of blood pressure, its necessity, and the two main types: systolic and diastolic.
Illustrates how blood pressure varies throughout the day and lists influencing factors.
Describes the color-coded indicator on the display for immediate interpretation of measurement results.
Explains CAM technology, which performs multiple measurements for enhanced accuracy, recommended by cardiologists.
Details the monitor's ability to detect and indicate irregular heartbeats during measurement.
Lists essential safety guidelines for using the blood pressure monitor correctly and safely.
Details the cuff's design, material, and measurement range for arm circumferences.
Explains the various elements and indicators shown on the device's LCD display.
Provides step-by-step instructions on how to properly insert the required AAA batteries.
Details the process of setting desired hours and minutes for the alarm reminders.
Provides crucial advice on posture, relaxation, and arm positioning for accurate measurements.
Step-by-step guide on how to correctly apply the cuff to the arm for measurement.
Shows the average of all recorded measurements for the selected user.
Displays the average of measurements taken during the day-time period (4:00 AM - 9:59 AM).
Displays the average of measurements taken during the night-time period (5:00 PM - 1:59 AM).
Details how to review individual past blood pressure and pulse readings stored in the device's memory.
Instructions on how to clear all recorded measurement data from the device's memory.
Offers solutions for specific problems like no display, incorrect heart rate, or cuff inflation issues.
Instructions on how to clean the exterior of the monitor and its components properly.
Recommendations for storing the device to maintain its condition and performance.
Details key technical data including power source, dimensions, weight, ranges, and operating conditions.
General| Cuff Size | 22-32 cm |
|---|---|
| Memory | Yes |
| Irregular heartbeat detection | Yes |
| WHO indicator | Yes |
| Measurement Method | Oscillometric |
| Pulse Range | 40-199 beats/min |
| Display | LCD |
| Automatic Shut-off | Yes |
| Type | Automatic |
| Intended Use | To measure blood pressure and pulse rate |
| Power source | Batteries |
| Power Supply | 4 AAA batteries |
| Memory Capacity | 90 measurements per user |
To Next Page
