Indicator Lights Operation
In the power-on state, press the LED light button once to be always on, press it twice
to turn on the SOS light, and press it again to turn off the indicator lights.
Troubleshooting
Problem Cause Solution
The air pump cannot be started
normally.
1.The power cord is not plugged
properly.
2.The battery is low.
The motor stops working due to
overheating or overload.
1.Make sure that the power
wire is plugged in the 12V
DC socket.
2.Charge the air pump.
3.Cool the motor and
restart the air pump.
If the problem still cannot
be solved, please contact
local service agents
or similar authorized
personnel to change the
product.
The inflation or deflation is slow
or abnormal.
1.Check whether the hose is
blocked or cracked.
The joint between the hose and
air bag is not installed properly.
1.Change the hose or
make it unblocked, and
check whether the hose is
cracked.
2.Reinstall the hose.
If the problem cannot be
solved, please contact local
service agents or similar
authorized personnel to
change the product.
Maintenance & Storage
1. After use, or if you want to move, maintain or adjust the product, please first pull
out the DC plug from the socket.
2. When it’s not in use, properly store it after it’s fully cooled.
3. Do not exposed it to the rain and don’t immerse it in water.
4. Please store it in a dry and ventilated place.
Learn more about the EU Declaration of Conformity, Please click below link to
download
：
http://files.drmeter.com/m51-1420b-01-uk.pdf
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and this
device must accept any interference received, including interference that may cause
undesired operation.
7 8
To Next Page
Loading...