DR Power Pro 44TF - Page 8

8 DR
®
TOW BEHIND FINISH MOWER
Specifications
13.3 TQ Pro 44TF Model
14.5 HP Pro XL60TF Model
Engine
See your Engine Manual for oil capacity and other
Engine specifications.
See your Engine Manual for oil capacity and other
Engine specifications.
Starting System
Manual Start
Electric Start
Fuel Tank
3.5 L (.92 gal), Gasoline, Unleaded
2.5 Gal. (9.46 L), Gasoline, Unleaded
Battery
NA
12V, 9Ah
Wheels
Front: 11 X 4 Turf Tread
Rear: 11 X 4 Turf Tread
Front: 11 X 4 Turf Tread
Rear: 11 X 4 Turf Tread
Distance From
Centerline of Tow
Vehicle to Outer
Cutting Edge
Straight Back: 22"
Offset Position 1 (either L or R): 49.5"
Offset Position 2 (either L or R): 68"
Straight Back: 30"
Offset Position 1 (either L or R): 57.5
Offset Position 2 (either L or R): 76"
Number of Offset
Positions
5
5
Adjustable Cutting
Height
From 1-1/2"min. to 5-1/2" max.
From 1-1/2"min. to 5-1/2" max.
Cutting Width
44"
60"
Cutting Capacity
2' high grass
2' high grass
Blade Tip Speed
18,500 - 19,000 ft/min
17,500 - 18,000 ft/min
No. of Blades
2
3
Blades Type
Air Tipped
Air Tipped
Deck
12 GA Welded Steel
12 GA Welded Steel
Discharge
Side
Side
Spindle
1" Dia. Shaft with 2 Sealed 20 mm Bearings
1" Dia. Shaft with 2 Sealed 20 mm Bearings
Belt
A76
AK124
Electric Clutch
75 ft-lb
75 ft-lb
Max Speed Mow/Tow
5mph
5mph
Tongue Weight
10 lbs.
10 lbs.
Machine Dimensions
132" L x 60" W x 29" T
132" L x 75" W x 26" T
Machine Weight
270 lbs.
320 lbs.
Assembling the DR TOW-BEHIND FINISH MOWER
Hardware Supplied in Product Package (Figure 4 and Table below):
Item # Part # Description Qty
1 ............. 255491 ........ Pin, Clevis, 1/2" x 2 1/2", TRT ..........................................3
2 ............. 234991 ........ Washer, SAE Flat, 1/2", ZP ...............................................4
3 ............. 352811 ........ Bolt, Hex, Flange, Tri Lobe, 3/8-16 X 3/4", GR5 ZP ........5
4 ............. 160031 ........ Pin, Hair, 1/2" To 9/16", .12" Wire ..................................4
5 ............. 157201 ........ Key Ignition Switch ...........................................................1
6 ............. 187371 ........ Pin, Clevis, 1/2" OD X 4.5" LG .........................................1
7* ........... 362891 ........ Bushing, Sway Brace .........................................................3
8* ........... 365721 ........ Bolt, Hex, Flange, ½-13 x 3.5", GR5, ZP ...........................3
9* ........... 333351 ........ Nut, Nylon Lock, Flanged, 1/2-13 ....................................3
*Mow Pro-60 Model Only
Compare the hardware of the Product Package with Figure 4 and the “Hardware
Supplied” list above. If you have any questions, please contact us at
www.DRpower.com.
6
Figure 4
5
4
3
1
2
8
7
9