4
5 Measuring ........................................................................................................ 28
5.1 Conditions of the sample and practical hints 28
5.2 The Digox 6 data logger 29
5.2.1 How to operate the continuous Data logger 29
5.2.1.1 Selection of the interval 29
5.2.1.2 Recording and saving measuring values 30
5.2.2 How to operate the measuring point data logger (optional) 30
5.2.3 Output of measuring values 30
5.2.4 Deleting measure values 31
5.3 How to operate DigoxWin 32
5.3.1 Introduction 32
5.3.2 Installing DigoxWin 32
5.3.2.1 Windows operating system 32
5.3.2.2 Checking the data transmission settings 32
5.3.3 Starting DigoxWin 33
5.3.4 Processing measuring data on the PC 34
5.3.4.1 The online data logger 34
5.3.4.2 Reading out the data storage in the Digox 6 35
5.3.4.3 Evaluate measuring data 36
5.3.5 Further DigoxWin functions 37
6 Maintenance..................................................................................................... 38
6.1 Cleaning the electrodes 38
6.1.1 General hints 38
6.1.2 Steps to be performed 38
6.2 Exchanging diaphragm and sealing rings 39
6.2.1 General hints 39
6.2.2 Means required 39
6.2.3 Works to be carried out 40
6.3 Hints regarding the moisture indicator 41
6.4 Hints regarding the battery operation 41
7 Fault messages and troubleshooting .......................................................... 42
8 Special functions............................................................................................. 46
8.1 Status display 46
8.2 Selecting recorder measuring ranges and output currents 46
8.3 Menu level 2 functions 47
8.3.1 Make system settings 48
8.3.2 Setting the interface 48
8.3.3 Setting the clock 49
8.3.4 Polling the identification number 49
8.3.5 Enabling options 49
To Next Page
Loading...