DR PRO-XL User Manual

CONTACT US AT www.DRpower.com 29
Tire Pressure Check
Tools Needed:
• Tire Pressure Gauge
• Air Compressor
1. Remove the Valve Stem Protective Cap (Figure 73) and check the tire
pressure with a Tire Pressure Gauge.
2. Check what the manufacturers recommended pressure is that is stamped
on the side of the Tire.
3. If the pressure is too low, add air through the Valve Stem with an air hose.
4. Replace the Valve Stem Protective Cap when finished.
Connecting the Battery Wire (Electric-Starting Models Only)
We ship all Electric-Starting systems with the Negative Battery Terminal Wire
disconnected. This prevents the Battery from discharging during shipment.
Before using your DR LEAF and LAWN VACUUM, you must connect the Battery
Wire.
1. Connect the Negative Wire to the Negative Post on the Battery by sliding
the Terminal onto the Battery Post (Figure 74).
Negative
Battery
Cable
Figure 74
Do not over inflate the tires. Inflate to the manufacturers recommended
pressure found on the tires.
Valve Stem
with Cap
Figure 73

DR PRO-XL Specifications

General

Brand	DR
Model	PRO-XL
Category	Other
Language	English