Need help?Do you have a question about the Dräger Evita Infinity V500 and is the answer not in the manual?
General| Brand | Dräger |
|---|---|
| Model | Evita Infinity V500 |
| Category | Medical Equipment |
| Language | English |
Describes the Evita V500's purpose for adult, pediatric, and neonatal ventilation.
Details the purpose of Medical Cockpits for monitoring and control in patient care.
Overview of the complete Evita ® Infinity V500 intensive care ventilator system components.
Identifies key components and controls on the front panel of the Infinity C500 cockpit.
Details the ports and mounting options on the back panel of the Infinity C500 cockpit.
Highlights the front panel components of the Evita V500 ventilation unit.
Explains the layout and sections of the main operating screen.
Details the various information fields and labels displayed on the main screen.
Details the color coding and urgency of different alarm priorities.
Describes the interaction method for selecting and setting parameters using controls.
Step-by-step guide for powering on the ventilation system and cockpit.
Instructions for configuring the breathing circuit and humidifier settings.
Guide for executing the mandatory system check before patient use.
Steps to verify the proper function of the breathing circuit.
Process for admitting a new patient and setting initial parameters.
How to configure ventilation parameters based on patient category.
Guidance on switching between non-invasive and tube ventilation modes.
Instructions for choosing between Ventilation and O2 therapy modes.
How to open and navigate the ventilation settings dialog.
Detailed steps for adjusting specific ventilation parameters like RR.
Guide to combining ventilation modes with extra settings for optimization.
Procedure for activating and using O2 therapy.
Steps to properly shut down or put the Evita V500 into standby mode.
How optical signals like the alarm bar and message fields indicate alarms.
How acoustic signals indicate alarms and how to silence them.
Steps to view active alarms and acknowledge them.
Instructions for configuring upper and lower alarm limit values.
Guide for correctly connecting the CO2 sensor and cuvette.
Steps for calibrating the CO2 sensor for accurate measurements.
To Next Page
