Need help?Do you have a question about the Dragon Touch D1 and is the answer not in the manual?
General| Video Resolution | 1080P |
|---|---|
| Display | 2.0" LCD |
| Loop Recording | Yes |
| G-Sensor | Yes |
| GPS | No |
| Wi-Fi | No |
| Resolution | 1920x1080 |
| Night Vision | Yes |
| Field of View | 170 degrees |
| Storage | MicroSD card (up to 32GB) |
| Viewing Angle | 170 degrees |
| Memory Card Support | MicroSD card (up to 32GB) |
Enter and exit menu. Access recording or system settings.
Used to navigate up through menu options or select choices.
Used to navigate down through menu options or toggle MIC on/off.
Confirms selections in settings or starts/stops recording.
Enters playback mode or returns to the main interface.
Manually locks the current video recording.
Turns the screen on/off with a short press, and the camera with a long press.
Configures video resolution to 1080FHD, 720P, or VGA.
Sets video recording intervals (off, 1, 3, or 5 minutes).
Balances light and darkness for optimal image quality.
Enables or disables audio recording for videos.
Adds date and time stamps to video recordings.
Detects collisions and locks footage; adjustable sensitivity.
Sets the power frequency to 50Hz or 60Hz.
Controls the on/off status of button sound alerts.
Allows selection of the camera's display language.
Configures the camera's date and time settings.
Formats the SD card to ensure compatibility.
Resets all camera settings to their original defaults.
Displays the current software version of the camera.
To Next Page