BY ANY DAMAGE TO THE BOAT
Contact your dealer or the yard for instructions. If not, you could endanger your safety
and/or lose your warranty.
GELCOAT REPAIRS
IMPORTANT
Successful repairs require dry weather and a temperature between +15° to 25° C.
• Ratio of hardener is min 2% and max 3%
• Gel setting time is approx. half an hour
• Never work in direct sun when applying gelcoat
How to make gelcoat repairs:
• First sand the actual repair with grit 80
• Then sand the area around it with grit 180-240
• Apply gel coat by 2 or 3 layers
• When completely dry sand it down with 120-240, thereafter with 500 – 800 – 1,200
• After that polish with rubber compound and finally wax the whole area
• Use lots of ventilation, gloves, glasses and dust mask
• Keep children away
WARNING
• The catalyst is a dangerous product and should not be left within children’s reach
• Avoid contact with skin and mucosa. Protect your eyes
• In case of contact, wash with soapy water and rinse liberally
Clean all tools with acetone
To Next Page
