Maintenance and product information
Gelcoat RAL non-skid colour:
Epoxy barrier under water:
The woodwork in the cabin is varnished with two-part satin varnish. To varnish again, sand
with grit 180 or finer sandpaper. You can use either one or two-component varnish with
satin finish, but please note that a lot of the panels are laminate not wood!
Dragonfly is built of hand-laid, reinforced fibre glass and polyester combined with 10-15 mm
PVC-sandwich foam core with closed cells, which do not absorb water.
For eventual repairs, use ONLY products on polyester basis. Epoxy can be used in an
emergency, but cannot be cosmetically improved later with gelcoat, as you can with the
polyester products.
Electronic equipment is not calibrated by the yard.
To Next Page
