How to troubleshoot no power on Drainastim Pro UFM001-1?
If your Drainastim Pro Medical Equipment has no power, first check if the power plug is disconnected and connect it securely. Also, ensure that the power button is turned on.
What to do if Drainastim Pro UFM001-1 does not work even with the power plug connected?
If your Drainastim Pro Medical Equipment does not work even when plugged in, make sure the power button on the unit is turned on. Also, check that the patches are securely clipped to the electrode cables.
Why is there no vibration in my Drainastim Pro Medical Equipment?
If you're experiencing no vibration with your Drainastim Pro Medical Equipment, consider the following: * Ensure your feet are washed and moistened, as dry feet can prevent proper function. * Remove any socks or stockings; feet must be bare. * Apply patches directly to the skin, not to clothing. * Position your feet correctly on the unit. * Confirm that the patches are applied to two points of the body.
Initial setup instructions for the Drainastim Pro device, including unpacking and component identification.
Step-by-step guide on how to use the footrests for electrical stimulation therapy.
Instructions on applying and using TENS electrodes for electrical muscle stimulation.
General| Category | Medical Equipment |
|---|---|
| Model | UFM001-1 |
| Type | Electrical Stimulation Device |
| Application | muscle stimulation |
| Power Supply | Battery |
| Frequency Range | 1-100 Hz |
To Next Page