EasyManua.ls Logo

DRAKE T-4XB User Manual

DRAKE T-4XB
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the DRAKE T-4XB and is the answer not in the manual?

DRAKE T-4XB Specifications

General IconGeneral
TypeHF Transmitter
Cooling SystemForced Air
ModesAM, CW, SSB
Audio InputsMicrophone
Power SupplyExternal power supply required
Weight15 lbs (6.8 kg)

Summary

GENERAL SPECIFICATIONS

DESCRIPTION

INSTALLATION INSTRUCTIONS

CONTROL FUNCTIONS

FRONT CONTROLS

Detailed explanation of the functions of the T-4XB's front panel controls like Main Tuning and Transceive.

FRONT CONTROLS & JACKS

Further details on front panel controls and associated jacks for operational setup.

TUNING PROCEDURE

BIAS ADJUSTMENT

Step-by-step guide for setting the correct bias voltage for the T-4XB transmitter.

TUNE UP ON DESIRED BAND

Procedure for tuning the transmitter to the desired operating band and frequency for maximum output.

TRANSCEIVE ALIGNMENT

Steps for aligning the transmitter for transceive operation with compatible receivers.

OPERATION

VOICE CONTROLLED & PUSH-TO-TALK OPERATION ON SSB

Guide to operating the T-4XB using VOX or PTT for SSB communication.

CW OPERATION

Instructions for operating the T-4XB in Continuous Wave (CW) mode, including sidetone and keying.

AM OPERATION

How to operate the T-4XB using Amplitude Modulation (AM) mode with controlled carrier.

RTTY OPERATION WITH R-4, R-4A, or R-4B and T-4XB

SERVICE DATA

TROUBLE-SHOOTING

Procedures and advice for diagnosing and resolving common issues with the T-4XB.

ALIGNMENT INSTRUCTIONS

ADJUSTMENT OF RF & MIXER STAGES

Detailed steps for aligning the RF and mixer stages of the transmitter for optimal performance.

CARRIER OSCILLATOR, FILTER MATCH, & BALANCED MODULATOR

Alignment procedures for the carrier oscillator, filter match, and balanced modulator circuits.

NEUTRALIZING FINAL AMPLIFIERS

Critical steps for neutralizing the final amplifier stages of the T-4XB to prevent oscillation.

AC-4 POWER SUPPLY

Related product manuals