INSTRUCTIONS FOR
Mechanical Water Timer
Stock No.36748 Part No.WTM1
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it for
the life of the product passing it on to any subsequent holder of the product. Read all these instructions before assembling,
operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools policy of
continuous improvement determines the right to make modifications without prior warning.
1. TITLE PAGE 2. GUARANTEE
1.1 INTRODUCTION:
USER MANUAL FOR:
MECHANICAL WATER TIMER
Stock no. 36748 Part no. WTM1
1.2 REVISIONS:
As our user manuals are continually updated, users
should make sure that they use the very latest version.
Downloads are available from:
http://www.drapertools.com/manuals.pgm
DRAPER TOOLS LIMITED, HURSLEY ROAD,
CHANDLER’S FORD, EASTLEIGH, HAMPSHIRE, SO53 1YF,
UK
WEBSITE: drapertools.com
PRODUCT HELPLINE: +44 (0) 23 8049 4344
GENERAL FAX: +44 (0) 23 8026 0784
1.3 UNDERSTANDING THIS
MANUALS SAFETY CONTENT:
WARNING! Information that draws attention to the risk
of injury or death.
CAUTION! Information that draws attention to the risk
of damage to the product or surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited. Permission is granted to
reproduce this publication for personal & educational use
only. Commercial copying, redistribution, hiring or lending
is prohibited. No part of this publication may be stored in a
retrieval system or transmitted in any other form or means
without written permission from Draper Tools Limited. In
all cases this copyright notice must remain intact.
Date first published December 2015
2.1 GUARANTEE
Draper tools have been carefully tested and
inspected before shipment and are guaranteed to
be free from defective materials and workmanship.
Should the tool develop a fault, please return the
complete tool to your nearest distributor or contact
Draper Tools Limited, Chandler's Ford, Eastleigh,
Hampshire, SO53 1YF. England. Telephone: (023)
8026 6355.
A proof of purchase must be provided with the
tool.
If upon inspection it is found that the fault
occurring is due to defective materials or
workmanship, repairs will be carried out free of
charge. This guarantee period covering
parts/labour is 12 months from the date of
purchase. The guarantee is extended to 24 months
for parts only. This guarantee does not apply to
normal wear and tear, nor does it cover any
damage caused by misuse, careless or unsafe
handling, alterations, accidents, or repairs
attempted or made by any personnel other than
the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the
Terms of Warranty, repair and carriage charges will
be quoted and made accordingly.
This guarantee applies in lieu of any other
guarantee expressed or implied and variations of
its terms are not authorised.
Your Draper guarantee is not effective unless you
can produce upon request a dated receipt or
invoice to verify your proof of purchase within the
guarantee period.
Please note that this guarantee is an additional
benefit and does not affect your statutory rights.
Draper Tools Limited.
Note: This tool is intended for domestic use only.
To Next Page
Need help?
General
