Draper 47812 - User Manual

Draper Tools Limited, Hursley Road,
Chandler's Ford, Eastleigh, Hampshire. SO53 1YF. U.K.
Helpline: (023) 8049 4344
Sales Desk: (023) 8049 4333
Internet: drapertools.com
E-mail: sales@drapertools.com
General Enquiries: (023) 8026 6355
Service/Warranty Repair Agent:
For aftersales servicing or warranty repairs, please contact the
Draper Tools Helpline for details of an agent in your local area.
©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
CONTACTS
YOUR DRAPER STOCKIST
SRMC0218
OIL
SUCTION
GUN
47812
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS PRODUCT.
INSTRUCTIONS
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.

Summary

Introduction to the Oil Suction Gun

Scope of Use

Defines the rugged transfer gun's purpose for gear oils in gearboxes, transfer cases, and differentials.

Product Specifications

Details technical specifications including part number, hose type, plunger type, handle style, and capacity.

Technical Description and Identification

Component Identification

Identifies the main parts of the suction gun by number: PVC hose, barrel, end cap, and T-handle.

Operating the Oil Suction Gun

Gun Operation Procedure

Explains how to operate the gun by pulling the handle to remove and pushing to add fluids.

Maintenance and Care

Rubber Parts Maintenance

Advises on cleaning and drying rubber parts after contact with non-petroleum fluids to prevent swelling.

Contact Information

Draper 47812 Specifications

General

Brand	Draper
Model	47812
Category	Construction Equipment
Language	English