Need help?Do you have a question about the Draper BDS368 and is the answer not in the manual?
Details on plug wiring, fuse replacement, and earthing requirements for safe connection.
Table specifying correct wire sizes for extension leads based on amperage and length.
Maintaining a clear, well-lit, and safe work area, avoiding hazardous conditions.
Guidelines on appropriate dress, protective equipment, and keeping others away.
Best practices for tool usage, cord care, securing work, and checking for damage.
Ensuring machine stability, proper placement, and understanding kickback risks.
Safe handling of workpieces, avoiding awkward positions, and using protective measures.
Practices for safe operation, part integrity, and material compatibility (wood/nonferrous metals).
Identifies key parts of the belt and disc sander through numbered diagrams and labels.
Instructions for safely unpacking the product and checking for damage.
Securely fasten the sander to a stable surface like a workbench using appropriate fixings.
Attaching the sanding disc table and aligning it correctly with the disc face.
Fitting the dust deflector into the dust collection cover slots.
Positioning and adjusting the back stop for sawdust flow.
Mounting and aligning the work support table for sanding operations.
Instructions for setting up the sander for vertical belt sanding.
Recommendation for connecting a vacuum cleaner for efficient dust removal.
Details on using the no-volt switch for safe power control and emergency stops.
Guidance on holding work and moving it across the belt for straight sanding.
Technique for sanding the ends of long workpieces with the belt in vertical position.
Instructions for sanding inside and outside contours on drums and belt.
Proper technique and safety for disc sanding, including mitre gauge use.
Step-by-step guide for replacing the sanding belt and adjusting its tracking.
Procedure for removing the old disc and applying a new adhesive-backed sanding disc.
Instructions for replacing the drive belt, including tensioning the housing.
Routine inspection, cleaning, and motor ventilation for optimal performance.
Guidance on replacing the supply cord by authorized personnel only.
Advice on polishing the worktable for smoother operation, avoiding wax on the belt.
Diagnosing and resolving issues when the motor fails to start.
Troubleshooting causes for the machine slowing during sanding operations.
Identifying and fixing problems with the sanding belt tracking off the pulleys.
Addressing issues causing wood to burn during sanding, typically glazed belts/discs.
List of available sanding discs with grit grades and pack quantities.
Details on hook and loop sanding discs, including grit options.
Catalog of available sanding belts with various grit grades and pack sizes.
Guidelines for disposing of the power tool responsibly and according to environmental regulations.
Explanation of common symbols used in the manual for safety and disposal.
Provides contact details for Draper Tools Limited, including helpline and sales desk.
Information on how to find a local service or warranty repair agent.
To Next Page
General