Draper SDS+ User Manual

SDS+ ROTARY
HAMMER DRILLS
■ STOCK No.57828 110V ■ PART No.PHD520VC
57829 240V PHD520VC
57830 110V PHD624VC
57831 240V PHD624VC
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS TOOL.
GENERAL INFORMATION
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which
should be kept with the machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any operation of
the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both machine and operator
safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool
policy of continuous improvement determines the right to make modifications without prior warning.
09/99

Draper SDS+ Specifications

General

Drill Type	Hammer Drill
Voltage	230 V
Max Drill Diameter (Wood)	30 mm
Max Drill Diameter (Steel)	13 mm
Impact Rate	0-4800 bpm

Summary

General Information

Declaration of Conformity

Product Specifications

Product Guarantee Information

Power Supply and Wiring

Connecting to Mains Power

Instructions for connecting 240V and 110V models to power, including safety warnings and wire color matching.

Electrical Wiring Diagrams

Visual representations of the internal electrical connections for the PHD520VC and PHD624VC models.

General Safety Instructions

Power Tool Safety Precautions

Comprehensive safety guide covering personal protection, work area, tool handling, maintenance, and hazard avoidance.

Getting to Know Your SDS+ Drill

Component Identification Guide

Labeled diagrams illustrating all parts and features of the SDS+ Rotary Hammer Drills for user familiarization.

Operation and Use

Controls, Speed, and Gear Selection

Guide to operating the switch, adjusting speed settings, and selecting gear modes for optimal performance.

Drilling, Impact, and Directional Modes

Instructions for selecting drilling versus impact modes and changing the tool's rotational direction.

Tool Insertion and Chuck Usage

Fitting and Removing Tools

Step-by-step instructions for inserting and removing SDS bits and accessories from the tool holder.

Chisel Adjustment and Slip Clutch Function

How to adjust the chisel position and understand the slip clutch mechanism for safe operation.

Using the Optional Drill Chuck

Guidance on fitting and utilizing the accessory drill chuck for standard drill bits.

Maintenance and Part Replacement

Routine Maintenance and Disposal

Procedures for regular inspection, cleaning, ventilation, and environmentally sound disposal of the tool.

Replacing Brushes and Power Cable

Instructions for replacing worn motor brushes and damaged power supply cables by authorized personnel.

Optional Accessories

Notes