SPECIFICATION
GUARANTEE
Draper Tools have been carefully tested and inspected before shipment and are
guaranteed to be free from defective materials and workmanship for a period of 12
months from the date of purchase except where tools are hired out when the guarantee
period is ninety days from the date of purchase.
Should the machine de
velop any fault, please return the complete tool to your nearest
authorized warranty repair agent or contact Draper Tools Limited, Chandler's Ford,
Eastleigh, Hampshire, SO53 1YF. England. Telephone: (023) 8026 6355.
If upon inspection it is found that the fault occur
ring is due to defective materials or
workmanship, repairs will be carried out free of charge. This guarantee does not apply
to normal wear and tear, nor does it cover any damage caused by misuse, careless or
unsafe handling, alterations, accident, or repairs attempted or made by any personnel
other than the authorised Draper warranty repair agent.
This guarantee applies in lieu of any other guarantee expressed or implied and
variations of its terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated
receipt or invoice to verify your proof of purchase within the 12 month period.
Please note that this guarantee is an additional benefit and does not af
fect your statutory
rights.
Draper Tools Limited.
The Draper Tools policy of continuous improvement determines the right to change specification
without notice.
Stock No. 56225 56226
Part No. SP50 SP60
Max. head height 40M 48M
Max. flow rate 50L/min 60L/min
Output elbow size 25mm 25mm
Motor 700W 1000W
Voltage 230V/A.C.
230V/A.C.
Thermal overload protection Yes Yes
Guaranteed sound power level LWA 76db(A) 81db(A)
- 2 -
To Next Page
Loading...
