Draw tite 24943 User Manual

Installation Instructions
PART NUMBERS: 24943, 77330, CQT24943
Applications:
Years Make Models
2016-Current* Chevrolet Cruze
Equipment Required:
Ratchet
Torque
Wrench
Safety
Glasses
Sockets
7 mm
15 mm
DO NOT EXCEED LOWER OF TOWING VEHICLE
MANUFACTURER’S RATING OR:
Hitch Type Max Gross Trailer Weight Max Tongue Weight
Weight Carrying 2000 lb. (908 kg) 200 lb. (90.8 kg)
Weight Distributing N/A N/A
Representative Vehicle Photo
Installation Time: 80 min
The time listed above is the average time
for professional installers. If you do not
feel comfortable performing this
installation on your own or are in need of
assistance, please contact a professional
installer.
Trailer Hitch Illustration
Front of
Vehicle
6’’ Socket
Extension
Star
Driver
T15
Utility
Knife
Marker

Draw tite 24943 Specifications

General

Hitch Class	Class I
Drilling Required	No
Maximum Gross Trailer Weight	2000 lbs
Maximum Tongue Weight	200 lbs
Hitch Material	Steel
Finish	Black Powder Coat
Installation Type	Bolt-On
Weight Carrying Capacity	2000 lb
Tongue Weight	200 lb
Receiver Tube Size	1-1/4 inch

Summary

Vehicle Applications and Specifications

Applications Details

Specifies vehicle compatibility for the hitch, including model year, make, and model.

Installation Time Estimate

Provides an estimated installation time for professional installers.

Required Equipment List

Lists all necessary tools and safety equipment for the installation process.

Towing Capacity Ratings

Details the maximum gross trailer weight and tongue weight ratings for the hitch.

Step-by-Step Installation Guide

Fascia Removal Procedure

Instructions for safely removing the vehicle's fascia using specified tools.

Bumper Beam Removal

Guidance on detaching the bumper beam from the vehicle's frame.

Hitch and Bumper Beam Installation

Steps for mounting the hitch and reattaching the bumper beam.

Fastener Tightening and Torque

Specifies the correct torque for all fasteners to ensure secure mounting.

Bottom Fascia Trimming

Instructions for trimming the vehicle's bottom fascia to accommodate the hitch.

Final Reassembly

Guidance on reinstalling all removed fasteners and the vehicle fascia.