Do you have a question about the Drawmer MX PRO MX60 and is the answer not in the manual?
Type | Channel Strip |
---|---|
Number of Channels | 1 |
Power Output | Not applicable |
Compressor | Yes |
De-esser | Yes |
Enhancer | Yes |
Mic Preamp | Yes |
Damping Factor | Not applicable |
Inputs | XLR |
Outputs | XLR, 1/4" |
Frequency Response | 20Hz - 20kHz |
Total Harmonic Distortion (THD) | <0.05% |
Input Impedance | Mic: 2kΩ, Line: 20kΩ |