To Next PageTo Next Page
Need help?Do you have a question about the Dražice OKC 200 NTR/Z and is the answer not in the manual?
Describes the purpose and operational characteristics of indirect stationary tanks for hot water preparation.
Provides guidance for users regarding hot water consumption and energy-saving tips.
Details factors influencing household hot water consumption, such as user habits and equipment.
Offers tips for energy efficiency and lists benefits of using indirect heaters for heating water.
Defines heat loss (standby loss) measured over 24 hours to maintain set temperature.
Explains the construction of the tank, including materials, insulation, and key components.
Specifies environmental and usage conditions required for safe and proper operation of the water heater.
Provides instructions and considerations for securely mounting the water heater to a wall.
Details plumbing connections, safety valve installation, and related pipework requirements.
Outlines the procedure for connecting the indirect tank to the water supply and heating system.
Covers general electrical connection requirements and specific wiring methods for thermostats.
Provides essential guidelines for connecting the heater to the electrical supply and its components.
Illustrates wiring diagrams for electronic thermostats used with specific tank models.
Details the steps for initial startup, filling, and checking the heater after installation.
Instructions on how to safely drain and decommission the water heater for storage or disposal.
Covers regular checks, cleaning, anode replacement, and general maintenance for longevity.
Lists common problems, their indicators, and recommended solutions for troubleshooting.
Outlines maintenance tasks related to the thermostat and its associated components.
Identifies and describes the function of control panel elements like thermostat knobs and indicator lamps.
Explains how to adjust the water temperature using the thermostat knob and control panel markings.
Lists crucial regulations and checks that must be followed during the installation process.
Provides guidelines for the safe transport and storage of the appliance, including temperature limits.
Information on how to properly dispose of packaging and the old, unserviceable water heater.
General| Category | Water Heater |
|---|---|
| Volume | 200 liters |
| Capacity | 200 liters |
| Rated Voltage | 230 V |
| Mounting | Vertical |
| Diameter | 584 mm |
| Energy Efficiency Class | C |
| Thermal insulation | Polyurethane foam |
| Protection class | IP44 |
| Type | Indirect Heating |
| Power Source | Electric |
| Heat-up time with heat exchanger from 10°C to 60°C | 25 minutes |
| Heating element | None (Indirect) |
