Need help?Do you have a question about the DRE Waveline Plus and is the answer not in the manual?
General| Type | Infusion Pump |
|---|---|
| Manufacturer | DRE Medical |
| Model | Waveline Plus |
| ECG | No |
| SpO2 | No |
| Accuracy | ±5% |
| Battery | Rechargeable |
| Volume to be Infused (VTBI) Range | 0.1 to 9999 mL |
| Power Source | 100-240 VAC, 50/60 Hz |
| Alarms | Occlusion, Low battery |
| Flow Rate Range | 0.1-1200 ml/h (depending on syringe size) |
Details the objective, scope, and main contents of the service manual.
Covers manufacturer responsibilities, precautions, external marks, and classification.
Guidelines and requirements for servicing the patient monitor.
Overview of the patient monitor's features, dimensions, weight, and network capabilities.
Identifies and describes the components and controls on the monitor's front panel.
Identifies and describes the ports and connectors on the monitor's rear panel.
Details the sockets and receptacles located on the left and right side panels.
Comprehensive specifications covering safety, power, performance, display, recorder, and environmental aspects.
Outlines power, ventilation, and location requirements for the patient monitor.
Recommends a plan for maintaining the monitor's normal running, including inspections and cleaning.
Defines the manufacturer's responsibilities regarding safety and performance.
Provides guidelines for inspecting the monitor's appearance, cables, and safety marks.
Instructions for cleaning the display screen and equipment surface, with recommendations.
Details tests for power supply, battery, ECG, respiration, temperature, IBP, SpO2, and NIBP calibration.
Explains the importance and circumstances for performing electric safety tests on the monitor.
Discusses surface mounted devices and warnings related to their handling.
Troubleshooting steps for 'No display after power on' phenomenon.
Covers issues like no ECG waveform, baseline shift, noise, interference, weak respiration, no SpO2, intermittent SpO2, abnormal NIBP, low inflation pressure, abnormal IBP values, and wrong IBP waveform.
Configures waveform display, sweep speed, respiration wave speed, and fill-in.
Recalls and displays 48-hour data history for various parameters.
Allows recalling the recent 6-minute ECG waveform for analysis.
Configures printing contents, speed, channels, and alarm-triggered printing.
Adjusts alarm volume, heart rate/pulse rate volume, and screen lightness.
Sets up time, date, language, demo mode, clearing trend, and default configurations.
Diagram illustrating the system configuration and component connections.
Reference to attachment for schematic diagrams of the system.
Reference to attachment for PCB layout and test points.
Lists various parts of the monitor with their corresponding types.
To Next Page
