CONSTRUCTION
MANUAL
In the box you will nd:
- 3 x PCB boards
- The Aluminum panel
- A plastic bag with parts
- The metal enclosure
- A ribbon cable
- A DIN5 to 3,5mm MIDI Adapter
The plastic bag contains:
- 10 small knobs
- 3 large knobs
- 4 rubber feet
- A 2mm hex driver
- 14xM3 brass bolts
- 6xM3 black bolts
- 8 metal spacers 10mm length M3
- 8 washers M3
- 13 pot washers
- 13 pot nuts M10
Additionally, you will need to have:
- A tuner
- A multimeter
- A 10mm HEX nut screwer
- A small straight screwdriver for trimming
- A larger straight screwdriver for the knobs
- A Philips PH1 screwdriver
- A USB adapter at least 1A of power
- A good USB cable
- A mini jack 3,5mm to 6,4mm
- A few patch cables 3,5mm
- A couple of crocks connectors
To Next Page
Need help?
General
