Need help?Do you have a question about the Dream Chip ATOM one SSM500 and is the answer not in the manual?
Introduction to the ATOM one SSM500 Super Slow-Motion Camera System.
Dream Chip Technologies GmbH's commitment to delivering safe, effective, and reliable products.
General camera features including tripod and accessory threads.
Physical dimensions and mounting threads for the C-Mount version.
Physical dimensions and mounting threads for the B4 version.
Common attributes and lens mount dependent attributes (dimensions, weight).
Details about the 2/3" image sensor, including resolution and frame rates.
Internal recording capabilities for Trigger Mode, including storage and frame rates.
List of image processing functions like Defect Pixel Correction and color adjustments.
Specifications for the 5 channel, 10 BIT YUV422 3G SDI output.
Details on system functions like autostart, time code, remote control, and lens control.
Description and pinout of the Power / RS485 connector.
Details on the Hirose connector, power cable, and RS485/RS422 cable pinouts.
Description and pinout of the Hirose AUX connector for lens or UART control.
Information about the 5 HD-BNC 3G SDI outputs and their mapping.
Functionality of the HD-BNC genlock connector for tri-level sync.
Details on the 3.5 mm stereo jack for microphone input and phantom power.
Information about the reserved RJ45 Ethernet connector for future applications.
Description of the SD card slot used for firmware updates.
Procedure for adjusting the back-focus for C-Mount lenses.
Procedure for adjusting the back-focus for B4 lenses using shims.
Meaning of the 'Sys' LED states indicating system status.
Meaning of the 'Cam' LED states indicating image processing status.
Description of the information shown on the camera's OLED display.
Details on Trigger Mode for internal recording and playback up to 500 FPS.
Details on SSM Mode for streaming 240 FPS via HD SDI outputs.
Recommended settings and order for production setup in Trigger Mode.
Recommended workflows for independent color grading in Trigger Mode.
Workflow where live and playback image processing are synced.
Workflow for independent live/playback settings with manual setting pull.
Description of SSM Mode operation, streaming 240 FPS without internal storage.
Explanation of phase settings in SSM Mode affecting slow motion ratio.
Troubleshooting steps for when the camera does not respond to serial commands.
Information on whether a hardware camera controller is available.
Where to download the latest firmware and control software.
Information on CE compliance and tested technical standards.
FCC compliance details for U.S. customers regarding digital device limits.
General| Brand | Dream Chip |
|---|---|
| Model | ATOM one SSM500 |
| Category | Digital Camera |
| Language | English |
To Next Page
