This document is an instruction manual for a Dreamcatcher Fitted Washable Electric Blanket. It provides essential information regarding the product's specifications, usage, safety precautions, operation, care, maintenance, and warranty.

Function Description

The Dreamcatcher Fitted Washable Electric Blanket is designed to provide warmth and comfort by being placed directly onto a mattress. It features a heating element that warms the bed surface, offering an even distribution of heat. The blanket is washable, allowing for easy cleaning and maintenance. Double, King, and Super King sizes come with dual controls, enabling individual heat settings for each side of the bed. The blanket is equipped with an overheat safeguard system to prevent overheating and damage to the heating element, disengaging power if a hazard occurs. It is intended for household use only and is not recommended for hospitals.

Important Technical Specifications

Voltage: 220 - 240V~50Hz
Rated Power (Single): 1 x 70W (FEBPS107-2)
Rated Power (Double/King): 2 x 60W (FEBPD137-2, FEBPK152-2)
Rated Power (Super King): 2 x 70W (FEBPSK182-2)
Sizes:
- FEBPS107-2: 91 x 193 cm (Single)
- FEBPD137-2: 137 x 193 cm (Double)
- FEBPK152-2: 152 x 203 cm (King)
- FEBPSK182-2: 182 x 203 cm (Super King)
Overheat Protection: All blankets are fitted with an overheat safeguard system that disengages power to the heating element before overheat hazards occur.
Washability: The blanket features waterproof heating elements, making it safe for hand or machine washing (controllers detached).

Usage Features

Placement: The electric blanket should be placed directly onto the mattress, with the power lead near the pillow's edge. If a mattress protector is used, it goes over the electric blanket.
Size Matching: Ensure the blanket size matches the mattress size (e.g., King size blanket on a King size mattress). Do not use a smaller blanket on a larger mattress or vice versa.
Even Warmth: The blanket is designed to provide even, all-over warmth for the entire bed surface and should not be tucked in at the sides.
Connection: After securing to the mattress, connect the plug to a power point and switch it on. The flexible cord and switch must be kept outside the bed, away from open windows or moisture.
Dual Control: Double, King, and Super King sizes have dual controls, allowing users to set their desired heat settings independently for each side of the bed.
Operation & Controls:
- Switch the controller to the ON position.
- Set temperature for "Body" or "Foot" from 1-4 heat settings, which can be used separately.
- Use the "Time" button to choose heating time from 1 to 9 hours for body and feet.
- Preheat: The highest mode (4 heat setting) should only be used for preheat and not for continuous operation. The 4th heating level automatically transfers to the 3rd level after 3 hours.
- Continuous Operation: Other modes (1-3) can be used continuously. It is recommended to preset the heat setting at number 2 if the blanket is to be left on all night.
- Moisture Drying: Initial use helps dry out moisture accumulated in the mattress.
- Odor: A slight odor may be noticed during the first use due to insulation material; this is harmless and will dissipate.
- LED Lights: If all LED lights flash simultaneously, check the connector. If they flash again, the unit is damaged.

Maintenance Features

Before Cleaning: Disconnect the blanket from the mains supply, then disconnect the controller from the blanket. Store the controller carefully.
Cleaning:
- Do not dry clean.
- Hand Wash: The blanket can be immersed in water and washed by hand due to its waterproof heating elements.
- Machine Wash: With controllers detached, the blanket can be machine washed (if size permits) on a WOOL or DELICATES cycle with a neutral detergent or mild soap powder at a wash temperature of 40°C. Do not use high-speed or extra spin cycles.
- Controller: Do not allow any part of the controller to be immersed in liquid.
Drying:
- Drape the blanket over a clothesline to dry; do not use pegs to secure it.
- Allow to dry naturally. Do not use direct heat sources like a hair dryer or heater.
- Ensure the blanket and its connector are fully dry before reconnecting the controller and using.
Damage Check: Regularly check the blanket, controller, and cable for damage or wear. If any is found, the product must be checked by a qualified engineer before further use.
Storage: When storing, fold neatly but not tightly (or roll) to avoid sharp bends in the heating element. Store where no other objects will be placed upon it. Avoid pressing creases into the appliance.
Inspection: It is recommended that the electric blanket be inspected by a qualified and registered person after 3 years of use.

Important Safety Instructions and Warnings

Use as an under blanket only. Not recommended for Futon or similar bedding systems.
Not recommended for adjustable beds. If used on an adjustable bed, ensure the blanket or cord cannot become caught or rucked.
Ensure the heating area (element) does not hang over the edge of the mattress, and attachment means are adequate.
For human use only, not pets.
Not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure they do not play with the appliance.
Prolonged application at the high setting can result in skin burns.
Do not tuck in, use tucked, or folded.
Keep the control unit away from an open window.
Do not use pins, as they may damage electric wiring.
Use only on an alternating current supply circuit of the proper voltage.
The flexible cord and switch must be kept outside the bed as far as practicable.
Do not switch the power on if the blanket is wet or in a folded state.
Switch off at the power outlet and remove the plug when the blanket is not in use.
Keep the blanket fully spread out at all times during use to avoid overheating. Inspect frequently to ensure this condition is maintained.
Bedclothes should not be folded back when the unit is switched on. Do not leave heavy objects on the bed when the unit is switched on (e.g., folded blankets or suitcases).
Do not dry clean.
Persons suffering from bed-wetting should not use this electric blanket.
If any abnormality or defect is observed, discontinue use immediately and consult the manufacturer or supplier.
Examine the blanket, controller, or flexible cord frequently for signs of wear. If wear is visible, return to the manufacturer or supplier for inspection and overhaul by a qualified and registered person.
Follow washing instructions for localized soiling.
Do not use over or under a water bed.
A blue flash in the switch when moved between settings is normal and not dangerous.
If the supply cord is damaged, it must be discarded.

Warranty

The product comes with a 36-month limited warranty from the date of purchase, covering defects in materials or manufacture. For issues, contact the technical helpline at 01302332030. Defective products under warranty due to materials or workmanship will be replaced. The warranty does not cover faults due to accidental damage, abuse, or failure to follow instructions. This does not affect statutory rights.

Environmental Protection

Waste electrical products should not be disposed of with household waste. Recycle where facilities exist and check with local authorities or retailers for recycling advice.

Declaration of Conformity

Futura Direct Ltd, England, declares that the Heated Electric Blanket has been manufactured according to full quality assurance procedures and conforms to CE, EMC, WEEE, and RoHS directives.

DreamCatcher FEBPS107-2 - Page 8

Table of Contents