Need help?Do you have a question about the DREAMJET 329 MIRACLE and is the answer not in the manual?
Avoid extreme temperatures, humidity, dust, and ensure ventilation.
Use only the specified power source and ensure cord safety standards are met.
Avoid touching moving parts, blocking vents, or inserting objects into slots.
Lists all accessories and components included in the printer package.
Describes the purpose of each button on the remote controller.
Details on adjusting speed, sensors, temperature, and cleaning schedules.
Open the left upper case to access ink bottles.
Two methods to pull ink to the print head using carriage or injector.
Check the height control sensor LED status after powering on.
Steps to initialize the printer before connecting to a computer.
Instructions to install the driver from CD or Epson website.
Navigate to printing preferences via the printer icon in Printers and Fax folder.
Adjust quality, paper, and advanced options via driver interface.
Define specific paper dimensions for custom media.
Save current settings as presets like "Low RPM" or "Best Photo".
Apply changes by clicking "OK" after configuration.
Initialize printer and load guideline files for alignment.
Select printer, access dialog, and set print job parameters.
Choose print mode and start the printing operation.
Position material on bed and initiate test print via standby button.
Place image on guideline and send to print.
Select print modes like "Rowrpm" or "Best Photo".
Check print gap during operation and review final output.
Prepare printer by placing paper and moving the bed.
Navigate to printer settings and select the maintenance tab.
Execute nozzle check print and analyze results for quality.
Clean the print head if nozzle check results indicate issues.
Understand LED indicators and potential sensor issues.
Open the printer and locate the sensor controller for reset.
Modify switch settings and press the ON button.
Confirm correct operation by checking the LED response.
To Next Page
General