The Dreamland Snowed In Organic Cotton Warming Mattress Protector is an appliance designed to provide warmth and comfort. It comes in various types: R9005, R9022, R9016, R9011, and R9020.
Function Description:
The mattress protector is a warming device intended for domestic use, placed between the mattress and the flat sheet to heat the bed. It is designed to warm the area from the feet up to just before the pillow, ensuring optimal well-being. The appliance features a control unit for selecting temperature settings and includes an automatic shut-off timer for safety and convenience.
Important Technical Specifications:
The technical specifications vary by type:
- TYPE R9005: 220-240 V, 50/60 Hz, 150 W
- TYPE R9022: 220-240 V, 50/60 Hz, 150 W
- TYPE R9016: 220-240 V, 50/60 Hz, 2x150 W
- TYPE R9011: 220-240 V, 50/60 Hz, 2x150 W
- TYPE R9020: 220-240 V, 50/60 Hz, 2x150 W
The appliance is Class II, indicating double insulation.
Usage Features:
- Positioning: The mattress protector (5) should be placed directly onto the mattress with the connector side facing downwards at the top. It must be spread out smoothly without creases, with the edges of the skirt tucked under the mattress. It is crucial that the mattress protector is placed between the mattress and the flat sheet, not on top of persons in bed.
- Connecting the Control Unit: The control unit connector (2) is inserted into the mattress protector connector (1). The control unit cable is then routed along the floor next to the bed. The plug is inserted into the mains socket (3). The control unit performs a self-diagnosis, indicated by flashing LEDs (10, 11) in a clockwise sequence for about two seconds.
- Temperature Selection: The control unit (6) has a temperature selector (8) and temperature LEDs (11).
- Fast Pre-heat (6): Press the ON/OFF button (7) to turn on. Select temperature 6 for fast pre-heat. The control unit automatically sets to temperature 6 and the auto shut off timer to 1 hour.
- Medium Pre-heat (5-4): For medium pre-heat, select temperature 5 or 4.
- Continuous or all night use (3-1): For continuous or all night use, select temperature levels from 1 to 3.
- To switch the mattress protector on, press the ON/OFF button (7). The appliance checks for correct operation, indicated by LEDs (10, 11) lighting up in a clockwise sequence.
- The temperature selector (8) allows choosing the desired temperature. The higher the number selected, the higher the temperature.
- The standby LED (9) lights up in blue when the appliance is on.
- Auto Shut Off Timer: The mattress protector has an automatic shut-off timer of 1, 3, or 9 hours. When switched on, the control unit automatically sets itself to 1 hour on the auto shut off timer. The timer LED (10) lights up in green. To set a different auto shut off timer, press the timer selector button (6) and select the desired timer. Each time the auto shut off timer is reset, the timer starts from zero.
- Switching Off: To switch off the mattress protector, press the ON/OFF button (7) and remove the plug from the socket (3).
- Important Safety Instructions:
- Do not use folded or creased.
- Do not insert pins.
- Do not use with wet hands or damp feet.
- Do not pull the power cable or the appliance itself to remove the plug.
- Do not pull or lift the appliance by the supply cord.
- Do not expose to humidity, weather, or extreme temperatures.
- Do not use to warm animals.
- Do not place the control unit under the pillow or under the sheets when in use.
- If the appliance is faulty, switch it off and contact an authorised technical service centre.
- Children under 3 years old should not use this appliance due to overheating risk.
- Children aged 3-8 years should only use it under supervision and with the control set to minimum temperature (heat setting 1).
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.
- The appliance must not be used by persons insensitive to heat and other very vulnerable persons who are unable to react to overheating.
- The cable and control unit must be arranged to avoid entanglement, strangulation, tripping or treading.
- Always disconnect the appliance from the mains supply before cleaning or performing maintenance.
- Examine the appliance frequently for signs of wear or damage. If damaged, contact an authorised technical service centre.
- If the supply cord is damaged, it must be replaced by an authorised technical service centre.
- The appliance is designed to heat a bed, not as a mattress protector for home use.
- This appliance is not intended for medical use in hospitals.
- Do not use if wet.
Maintenance Features:
- Before Washing: Always disconnect the appliance from the mains and disconnect the control connector (2) from the mattress protector connector (1) before cleaning or performing maintenance.
- Machine Washing: The mattress protector can be cleaned in the washing machine at 30°C, on a delicate cycle. Pre-treat any stains by spot cleaning before placing in the washing machine. Use only the delicate cycle for spinning. Do NOT make an additional spinning cycle.
- Drying in the Tumble Dryer: The mattress protector can be dried in a tumble dryer on a delicate cycle, but at the end of the drying cycle, it must be air-dried to allow it to dry completely. Remove the mattress protector from the tumble dryer at the end of the drying cycle and reshape it to its original size.
- Drying in the Open Air: Allow the mattress protector to fully air-dry before using it again. When drying in the open air, spread out the mattress protector on a clothes airer, ensuring it is stretched so the original size is maintained. Do not use clothes pegs to avoid damaging it, and leave it to fully dry spread out on a drying rack that is not exposed to the sun.
- Do Not Bleach.
- Do Not Dry Clean.
- Do Not Iron.
- Storage: When storing the appliance, allow it to cool down before folding. Do not crease the appliance by placing items on top of it during storage. Store the mattress protector in its original packaging, folded.
- Troubleshooting: If the LEDs on the control unit do not light up, check that the control unit plug is fully inserted in the socket. If the blue warning light is flashing, turn off the control unit, remove the plug, check that the control unit connector is fully inserted, and reinsert the plug. If the standby LED continues to flash, return the mattress protector to an authorised technical service centre. For other issues like temperature LED 1 flashing, product used incorrectly/damaged, damaged power cable/internal wire, damaged control unit, or holes/tears/creases in the fabric, return the mattress protector to an authorised technical service centre.
Disposal:
The packaging is made of recyclable materials. Dispose of packaging according to environmental protection regulations. Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), the appliance must be disposed of separately from other waste at the end of its useful life. Take the appliance to an appropriate recycling centre or hand it over to the retailer when a new, equivalent one is purchased.
Need help?
General
To Next Page