Dreamline AQUA SWING User Manual

“AQUA SWING” VER 1 REV 2 11/2015
1
AQUA SWING
SHOWER DOOR INSTALLATION INSTRUCTIONS
IMPORTANT
DreamLine
®
reserves the right to alter, modify or redesign products at any time without
prior notice. For the latest up-to-date technical drawings, manuals or additional details
please refer to your model’s web page on DreamLine.com.
Please read these instructions carefully before installing. If you have any questions
regarding installation, please contact our technical support specialists Monday
through Friday 8:00 AM – 7:00 PM EST at Phone: 1-866-731-2244,
Fax: 1-866-857-3638 or e-mail our technical support group at
Support@DreamLine.com
For more information about DreamLine
®
products please visit DreamLine.com
Left hand installation shown

Dreamline AQUA SWING Specifications

General

Product Type	Shower Door
Glass Type	Clear
Reversible Installation	Yes
Hardware Finish	Brushed Nickel
Walk-in Opening Width	up to 36 inches
Height	72 in
Material	Tempered Glass, Aluminum
Finish	Brushed Nickel
Warranty	Limited Lifetime
Glass Thickness	1/4" (6mm)
Frame Finish	Chrome, Brushed Nickel, Oil Rubbed Bronze

Summary

Preparation

Tools Required

Lists all tools needed for installation, including caulk gun, tape measure, and various drill bits.

Detailed Diagram of Shower door Components

Shower door installation

Prepare Opening and Position Wall Profile

Prepare the installation area and position the main wall profile against the tub deck and wall.

Secure Wall Profile and Install Glass Door

Fasten the wall profile, slide, level, and secure the glass door with screws.

Install Threshold and Final Components

Install the aluminum threshold, bottom anti-water strip, and handle onto the shower door.

Curing and Final Check

Allow the installed silicone to fully cure for 24 hours before using the shower.

Product Maintenance

Cleaning Guidelines

Provides instructions for cleaning acrylic back walls, glass, and hardware using soft cloths.