Need help?Do you have a question about the Dremel 225 and is the answer not in the manual?
General| Quantity per pack | 1 pc(s) |
|---|---|
| Type | Flex shaft |
| Compatibility | Dremel 4200, 4000, 400, 3000, 300, 398, 395, 285, 275, 200, 100, 8220, 8200, 8100, 800, 770 |
| Product color | Black, Grey |
| Brand compatibility | Dremel |
| Suitable for materials | Wood |
Instructions for assembling the Dremel Drill Stand.
Guide on how to mount different Dremel tools onto the drill stand.
Instructions for adjusting the depth of cut on the drill stand.
Details on using the depth stop feature for consistent drilling.
Step-by-step guide on how to attach the Dremel Flex-Shaft.
Information regarding service or replacement parts for the flex-shaft attachment.
Guide on how to mount different Dremel tools onto the router attachment.
Instructions for mounting the rip fence accessory.
Guide on how to adjust the rip fence for precise work.
Steps to adjust the routing depth accurately.
Method for performing circle routing operations with the attachment.
Technique for routing on the exterior surfaces of material.
Technique for routing on the interior surfaces of material.
Instructions for assembling and setting up the router table.
Guide on how to mount different Dremel tools onto the router table.
Procedure for adjusting the depth of cut on the router table.
Instructions on how to properly use the provided wrench.
Guidance on routing external and internal surfaces with the table.
Instructions for using the 'A' support guide for routing.
Guidance on the correct working direction when using pilot bits.
Essential safety warning about keeping hands clear of moving parts.
Information on increasing the working surface area of the router table.
Guidance on selecting the correct sharpening bit for the chain saw sharpener.
Step-by-step instructions for mounting the sharpening bit.
Detailed guide on the process of sharpening a chain saw chain.
To Next Page
