19
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
7103, 7105, 10 8---10 10 10
7117, 7120,
7122, 7123,
7134, 7144
Diamond Wheel Points
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
9931, 9932, 10 84-6---
9933, 9934,
9935, 9936
Structured Tooth Tungsten Carbide Cutters
* Speed for light cuts; Caution - burning on deep grooves.
• Depending on cutting direction relative to grain.
Not all speed settings can be achieved on 100 and 200 series tool. For certain applications,
a variable speed tool is required.
2 = 5,000 - 8,000 RPM's 4 = 9,000 - 15,000 RPM's
6 = 16,000 - 21,000 RPM’s 8 = 22,000 - 27,000 RPM’s 10 = 28,000 - 32,000 RPM’s
Speed Settings
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
100, 121, 131 10 10 66 8 ---
114, 124, 10 6466---
134, 144
190 10 10 4610 ---
118, 191, 192, 10 10 4610 ---
193, 194
116, 117, 10 6466---
125, 196
115 10 10 46 6 ---
198 10 8466---
199 10 8466---
High Speed Cutters
Catalog Soft Hard Laminates Steel Aluminum, Shell/ Ceramic Glass
Number Wood Wood /Plastic Brass, etc. Stone
105, 108 10 10 84 6 ---
106, 109, 10 10 64 6 ---
107, 110 10 10 64 6 ---
111 10* 10* 8* 46 ---
112 10* 10* 6* 46 ---
113 10* 10* 6* 46 ---
Engraving Cutters
To Next Page
Loading...
