-11-
D
UST EXTRACTION
(Optional accessory)
Your tool is equipped with a dust port for dust
extraction. To use this feature, insert dust
port adapter into dust port, attach vacuum
hose into the adapter, then connect the
opposite end of the hose to a shop vacuum
cleaner (Fig. 6).
Dust Port Adapter
(Optional accessory)
Vacuum Hose
(Not included)
Dust
Port
FIG. 6
SIDE HANDLE
The side handle is used to control and
balance the tool during operations. The
handle must be threaded into the front
housing (Fig. 7). Alternatively, the body of
the tool can be grasped with both hands for
control.
FIG. 7
To Next Page
Loading...
