Need help?Do you have a question about the Dresser Masoneilan SVI II AP-2 and is the answer not in the manual?
General| Manufacturer | Dresser Masoneilan |
|---|---|
| Model | SVI II AP-2 |
| Category | Valve Positioners |
| Output Signal | Pneumatic |
| Communication Protocol | HART |
| Enclosure Rating | NEMA 4X, IP66 |
| Input Signal | 4-20 mA |
| Supply Pressure | 20 to 100 psi |
| Temperature Range | -40 to +185°F (-40 to +85°C) |
| Certifications | ATEX, IECEx, CSA, FM |
Defines DANGER, WARNING, and CAUTION symbols for hazard communication.
Outlines safety considerations specific to the SVI II AP product.
Outlines how to connect the SVI II AP to the HART communication loop.
Provides essential guidelines for successful DC current, power, and HART communication.
Covers requirements for safe installation in explosive atmospheres.
Outlines general installation and maintenance requirements for hazardous areas.
Specific requirements for flameproof and dust ignition proof installations.
Details wiring requirements for intrinsically safe installations.
To Next Page
