8
FUNCTIONS OF HUMIDIFIER
Press and hold the water tank clasp at 45 ° and remove the water
tank.
Rotate the valve in an anti-clockwise manner. Remove the valve
and fill the tank with water. Once finished, turn and shut the valve
in a clockwise manner. (Please ensure that the rubber seal does
not fall o.)
Keep water tank inclined at 45 ° when installing it back into the
machine.)
After the installation of the water tank, please ensure that no
bubbles are generated before pressing the humidify button. You
can adjust the mist amount by pressing the mist button by low,
medium and high speed.
When the humidifier is not in use, discharge the water from the
water outlet and keep the water tank empty.
1
2
3
4
5
To Next Page
Loading...