Dri-Eaz DefendAir HEPA 500 User Manual (English)

Questions and Answers:

M
Monica BennettAug 2, 2025
Why is the change light on my Dri-Eaz DefendAir HEPA 500 Air Cleaner?
- M
  Morgan MckinneyAug 2, 2025
  If the 'Change' light is on for your Dri-Eaz Air Cleaner, it could mean that the primary filter is full and needs replacing. Refer to the Maintenance section for instructions on how to replace the filters. Another possible reason is restricted air intake. Check for and eliminate any bends or kinks in the ducting, or try removing the ducting altogether to see if that resolves the issue.
D
David ShawAug 8, 2025
What to do if the blower wheel is not turning in my Dri-Eaz DefendAir HEPA 500 Air Cleaner?
- J
  Jason BoothAug 8, 2025
  If the blower wheel in your Dri-Eaz Air Cleaner isn't turning, it could be due to an obstruction. Try removing any obstruction that you find. Alternatively, the blower wheel set screw might be loose. Try tightening the set screw.
T
Teresa JohnsonAug 13, 2025
What to do if my Dri-Eaz DefendAir HEPA 500 Air Cleaner does not operate?
- D
  David SmithAug 13, 2025
  If your Dri-Eaz Air Cleaner isn't working, there are several possible causes: * **No power to the machine:** Ensure the unit is plugged in and check the power at the outlet. * **Switch not turned on:** Make sure the switch is in the ON position. * **No power to the outlet:** Verify that the outlet has power. * **GFCI Tripped:** Reset the circuit breaker or GFCI.
R
Roy WilliamsAug 19, 2025
Why is the change light on my Dri-Eaz DefendAir HEPA 500 Air Cleaner illuminated?
- T
  tonya19Aug 19, 2025
  The change light on your Dri-Eaz Air Cleaner may be illuminated because: * The primary filter is full, so replace the filters. * The air intake is restricted, so eliminate any bends or kinks in the ducting, or remove the ducting.
R
Rachel Jensen DDSAug 26, 2025
How to fix a Dri-Eaz DefendAir HEPA 500 Air Cleaner with a blower wheel not turning?
- G
  Gerald RandallAug 27, 2025
  If the blower wheel on your Dri-Eaz Air Cleaner isn't turning, it could be due to: * An obstructed blower: Remove the obstruction. * A loosened blower wheel set screw: Tighten the set screw.