Drija ALEMANIA 60 - User Manual

Questions and Answers

J
Julia CampbellAug 17, 2025
What to do if the LED does not come on when Drija ALEMANIA 60 is plugged in?
- N
  Nicole ReyesAug 17, 2025
  If the LED on your Drija Stove doesn't light up when plugged in, there are several potential causes: * **No power:** Ensure the plug is securely in the outlet and that the outlet is functioning correctly. * **Connection issue:** Check the connection between the power board and the display board. * **Damaged power board:** The power board might need replacement. * **Damaged display board:** The display board might need replacement.
C
Christopher WilliamsAug 20, 2025
Why the Cooking Mode Indicator comes on, but heating does not start on my Drija ALEMANIA 60?
- M
  Michael NelsonAug 20, 2025
  If your Drija Stove's cooking mode indicator lights up, but heating doesn't start, this could be due to a few reasons: 1. The hob might be too hot. 2. There could be an issue with the fan; check if the fan runs smoothly, and replace it if it doesn't. 3. The power board might be damaged and require replacement.
S
Scott ButlerAug 23, 2025
What to do if Drija ALEMANIA 60 Stove unit is overheated?
- J
  John Owens IIAug 23, 2025
  If your Drija Stove is overheating, allow the unit to cool down until the temperature returns to normal. Then, press the “ON/OFF” button to restart the unit.
V
vrodriguezAug 25, 2025
Why does my Drija ALEMANIA 60 Stove stop heating and display flashes “u”?
- S
  Sara GibsonAug 26, 2025
  If your Drija Stove suddenly stops heating during operation and the display flashes “u”, it could be due to: * Using the wrong type of pan. Ensure you are using a proper pot as described in the instruction manual. * The pot diameter being too small.
D
Dr. Charles Snyder DVMAug 28, 2025
Why some buttons can’t work, or the LED display is not normal on my Drija ALEMANIA 60?
- B
  Bailey SmithAug 28, 2025
  If some buttons on your Drija Stove aren’t working, or the LED display is abnormal, the display board might be damaged and needs replacement.
C
Cindy WilliamsAug 30, 2025
What to do if the power board and the display board connected failure on my Drija ALEMANIA 60?
- J
  Jonathan WhiteAug 30, 2025
  If the power board and the display board connected failure on your Drija Stove, check the connection.
Y
yellisSep 2, 2025
What to do if the fan motor is damaged on Drija Stove?
- A
  Alexandra DavisSep 2, 2025
  If the fan motor is damaged on your Drija Stove, replace the fan.
D
Diana RivasSep 4, 2025
What happens if the supply voltage is above the rated voltage on Drija ALEMANIA 60 Stove?
- K
  Kevin TaylorSep 4, 2025
  If the supply voltage to your Drija Stove is above the rated voltage, inspect whether the power supply is normal. Power on after the power supply is normal.
R
Ronald DavidsonSep 6, 2025
What to do for ceramic plate temperature sensor failure on Drija ALEMANIA 60 Stove?
- S
  Steven DanielsSep 7, 2025
  If the ceramic plate temperature sensor fails on your Drija Stove due to a short circuit (F3 for 1#, F6 for 2#), check the connection or replace the ceramic plate temperature sensor.
K
Katie LeeSep 9, 2025
What to do if high temperature of IGBT on Drija ALEMANIA 60 Stove?
- R
  Ryan VincentSep 9, 2025
  If the IGBT temperature is too high on your Drija Stove, wait for it to return to normal. Touch the “ON/OFF” button to restart the unit. Also, check if the fan runs smoothly; if not, replace it.