EasyManua.ls Logo

Drinkwell Big-Dog - Operating Instructions; Do Not Run Dry; Household Use Restriction; Pet Fountain Setup

Drinkwell Big-Dog
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.petfountain.com
IMPORTANT!
Keep these instructions for information about:
• cleaning and maintenance to keep your fountain working properly
• warranty coverage
FOR HOUSEHOLD USE ONLY
OPERATING INSTRUCTIONS
D O N O T R U N D R Y
PET FOUNTAIN:
2
1. Inspect the bottom of the fountain to be sure
the motor is securely attached
(Fig. 1).
2. Remove the housing cover (lid) and insert
the lter cartridge down into the well in
the housing. It ts in the well diagonally
(Figs. 2A and 2B). The bottom of the lter
is narrower than the top and the black side
faces outward (toward the spout). If the t is
too tight, it is either in upside down or in the
wrong groove at the front (move it back one
groove). RINSING the lter before use will
help remove any loose bits of charcoal, which
are harmless.
3. Place the fountain in the desired location
before adding the reservoir. The use of a
protective surface is recommended when
placing on carpet or hardwood oors.
4. Fill both the bowl and the fountain housing
with water only until the water reaches the
ll level in the bowl (Fig. 3). Over lling may
result in too much splash during use.
DRINKWELL
FOUNTAIN
BIG-DOG
®
U.S. Patents No. 5,799,609 and 5,842,437
Fig. 1
MOTOR
Fig. 2A
FILTER
Fig. 2B
Fig. 3
Attention!
As with any electrical device, supervision of your pet's usage
should be exercised for the rst few weeks of use. If your pet is
prone to chewing, we strongly recommend you purchase a cord
cover from your local hardware store to avoid harm to your pet.