EasyManua.ls Logo

Drinkwell Original - OPERATING INSTRUCTIONS

Drinkwell Original
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.petfountain.com
U.S. Patents No. 5,799,609 and 5,842,437
IMPORTANT!
Keep these instructions for information about:
• cleaning and maintenance to keep your fountain working properly
• warranty coverage
FOR HOUSEHOLD USE ONLY
OPERATING INSTRUCTIONS
D O N O T R U N D R Y
PET FOUNTAIN:
Inspect the bottom of the fountain to be sure the
motor is securely attached (Fig. 1).
Remove the housing cover (lid) and insert the
lter cartridge down into the well in the housing.
It ts in the well diagonally (Figs. 2 A and B).
The bottom of the lter is narrower than the top
and the black side faces outward (toward the
spout). If the t is too tight, it is either in upside
down or in the wrong groove at the front (Move
it back one groove). RINSING the lter before
use will help remove any loose bits of charcoal,
which are harmless.
Fill the fountain with water, (both the bowl
and the housing where the lter sits). See
step 6.
Place in desired location. If placing on carpet or wood oor, the use of a
protective surface is recommended for under the fountain.
Fig. 2A
FILTER
Fig. 1
Fig. 2B
2
MOTOR
1.
2.
3.
4.
®

Related product manuals